Yamaha YSP-1000 - Manual (Page 88)

84
ADJUSTING SYSTEM PARAMETERS
2
Press / to select the speaker you want
to adjust.
The front panel display changes as follows.
TEST SUBWOOFER is only available when a subwoofer is
connected to this unit and SWFR is selected for BASS OUT in
SOUND MENU (see page 75).
3
Press / to adjust speaker volumes.
Control range: –10 dB to +10 dB
4
Press VOLUME +/– on the remote control to
adjust the volume level of this unit.
5
Press TEST when you have completed all
your adjustments.
y
To adjust the output level of your subwoofer, set BASS OUT to
BOTH or SWFR (page 75).
■ Using the audio output being played
back
You can also manually adjust the speaker levels while
playing back an input source such as a DVD.
• All the speaker levels cannot be adjusted when the stereo mode
is selected as the beam mode (see page 44).
• FRONT L/R cannot be adjusted when the stereo plus 3 mode is
selected as the beam mode (see page 43).
• Only CENTER can be adjusted when the target mode is
selected as the beam mode (see page 45).
1
Press CH LEVEL repeatedly (or press CH
LEVEL and then
/ ) to select the
speaker you want to adjust.
The front panel display changes as follows.
Note
ENTER
TEST LEFT
TEST CENTER
TEST RIGHT
TEST SUR.R
TEST SUR.L
TEST SUBWOOFER
ENTER
VOLUME
TEST
Notes
CH LEVEL MENU
RETURN TEST
ENTER
SURROUND OFF SPORTS
0 +10
CINEMA DSP
CH LEVEL
ENTER
CH LEVEL
FRONT L +1.0dB
CENTER -2.5dB
FRONT R +1.0dB
SUR.R +2.0dB
SUR.L +2.0dB
SWFR --dB
or