Yamaha YHT-470 - Manual (Page 10)

1
Stop the unit.
2
3
Select the desired track.
* Repeat step 3 to set more programs.
You can select the same track again.
4
10
PROGRAM PLAY
You can enjoy listening to your favorite tracks in any desired order using programmed play. As many as 25 tracks can be
programmed for a disc.
Display information during program play
➀
Shows the program number for the track to be set next.
➁
Shows the selected track number.
➂ Shows the total time of the tracks currently programmed.
➃ Shows only the numbers of programmed tracks.
* If “P-01” does not appear in the display after the PROG
button is pressed, press the TIME display mode-select
button.
* If the total time exceeds 99 minutes and 59 seconds, the
time will not be displayed.
Notes
• In step 2, if “P-01” does not appear in the display, press the
TIME display mode-select button.
• If, during programming, the TIME display mode-select button
is pressed, the program number display can be changed to
display the total time of the programmed tracks. To return to
the previous display, press the TIME display mode-select
button once again.
• The SKIP ( and ) button can be used during playing,
but only within the range of the programmed tracks.
• The SEARCH ( and ) button can be used during
playing to search through all tracks, including
unprogrammed tracks.
• The PAUSE mode can also be programmed (one time only),
if so desired, by pressing the PAUSE button instead of a
numeric button. (In this case, “ B” is illuminated in the
display.)
• If, for a compact disc with 25 tracks or more, track number
25 or higher is programmed, the total time will disappear
from the display.
LOGODISK
STOP
PROG
1
4
3 2
1 10 2 3 4 5 6 7 8 9 0 +
PLAY
3
1
2 4