Yamaha CRX-330 - Manual (Page 17)

BASIC RECEIVER OPERATIONS
13
En
Engl
ish
BASIC
OPERATIONS
Follow the procedure below to select an input source and adjust the sound settings on this unit.
1
Press STANDBY/ON to turn on this unit.
The front panel display lights up.
2
Press one of the input selection keys or
press INPUT on the front panel to select the
desired input source. Each time you press
INPUT, the input source changes in order of
CD, iPod, FM and USB.
3
Start playback on the selected source
component or select a radio station.
For information on the disc playback, see page 15,
and for information on tuning, see page 18.
4
Press (down) / (up) to adjust the
volume to the desired output level.
■ To adjust the audio quality
1
Press FUNCTION to display the function
menu.
2
Press / repeatedly to select TREBLE,
BASS, or BALANCE and press Center.
3
Press / repeatedly to adjust the
setting and press Center.
TREBLE: Adjusts the high frequency response.
BASS: Adjusts the low frequency response.
BALANCE: Adjusts the volume level of each left
and right speaker channel.
y
TREBLE, BASS, and BALANCE are not adjustable when using
the headphones.
■ To dim the display
You can dim the front panel display of this unit.
1
Press FUNCTION to display the function
menu.
2
Press / repeatedly to select DIMMER
and press Center.
Press
/ to select the brightness and press
Center.
■ To use the ECO mode
This mode reduces power consumption during the standby
mode. Your iPod or USB device cannot be charged during
standby mode and ECO MODE is ON.
1
Press FUNCTION to display the function
menu.
2
Press / repeatedly to select ECO
MODE and press Center.
3
Press / to select ON or OFF and press
Center.
BASIC RECEIVER OPERATIONS
STANDBY ON
PHONES
VOLUME
INPUT
STANDBY ON
CD iPod FM USB
SLEEP
FM PRESET
FUNCTION
MENU
DISPLAY
FOLDER
SHUFFLE REPEAT
MUTE VOLUME
TUNING MEMORY
VOLUME INPUT
STANDBY/ON
VOLUME
/
Input
selection
keys
FUNCTION
Center
/
STANDBY/ON