Zanussi ZOB 641 - Manual (Page 4)

4
Operation
Oven function control knob
The oven function control knob (Fig. 1) can have the
following symbols and functions (depending on the
models):
0 OFF position
Oven light
Conventional cooking - The heat comes from
both the top and bottom element, ensuring even
heating inside the oven.
Bottom heating element - The heat comes
from the bottom of the oven only.
Fan cooking - This allows you to roast or roast
and bake simoultaneously using any shelf,
without flavour transference.
Grill element only - can be used for grilling.
Defrost Setting - This setting is intended to
assist in thawing of frozen food.
Thermostat control knob (Fig. 2)
Turn the thermostat control knob to select temperatures
between 50°C and 250°C (MAX).
The Safety Thermostat
This oven is provided with a safety thermostat. In case
of malfunctioning of the main thermostat, and
consequent over-heating, the safety device will stop the
power supply to the appliance. If this happens, call your
local Zanussi Service Centre. Under no circumstances
should you attempt to repair the appliance yourself.
Thermostat control light (°C)
Once the oven temperature has been selected, the
temperature light will come on and remain on until the
oven has reached the correct setting; after that, it will go
on and off with the thermostat, showing how the tempe-
rature is being maintained.
Oven control light
It will come on every time an heating element is set on
operation.
The Cooling Fan for the Controls
(Model ZOB 652)
This oven is provided with a cooling fan, meant to keep
the front panel, the knobs and the oven door handle
cool. This fan may run on after the oven or grill is
switched off, until a normal temperature is reached.
Fig. 1
50
MAX
100
150
200
FO2673 Fig. 2
0
FO2673
0
FO2741
Model ZOB 652
Model ZOB 641