When the oven is first installed, End of cooking programmer – Zanussi ZOB 641 User Manual

Page 5

Advertising
background image

5

Before cooking for the first time, carefully wash

the oven accessories.

Once the oven has been installed:
a) set the thermostat knob to MAX (250);

b) switch the oven function control knob to conventional

cooking ( );

c) allow the oven to run empty for approximately 45

minutes;

d) open a window for ventilation.

During this time, an unpleasant odour may be emitted.

This is absolutely normal, and is caused by residues of

manufacturing.

Repeat this operation for the grill and fan cooking function.

Once this operation is carried out, let the oven cool down,

then clean the oven cavity with a soft cloth soaked in warm

soapy water.

FO 2161

Fig. 4

To open the oven door, always catch the

handle in its central part (Fig. 4).

When the oven is first installed

End of cooking programmer

This device (Fig. 3) allows you to make the oven switch

off automatically once the preset time is over. An acousitic

signal will be heard when the cooking is completed.The

cooking duration can be set up to 90 minutes maximum.

Place food in the oven and turn the oven function control

knob and the thermostat control knob on the required

settings. Turn the timer knob to maximum time position

("90"), then turn it back to set the required cooking time.

When the cooking time is over, an acoustic alarm will

sound and the oven will switch off automatically.
Turn the timer knob on to set the oven on manual
operation.

Fig. 3

5

10

15

30

45

60

75

90

FO2675

Advertising
This manual is related to the following products: