Important safeguards, Save this manual for reference – Lumex Syatems 763400A User Manual

Page 3

Advertising
background image

2

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USING

DANGER - To reduce the risk of electrocution:

1. Always unplug this product immediately after using.

2. Do not use while bathing.

3. Do not place or store product where it can fall or be pulled into a tub or sink.

4. Do not place in or drop into water or other liquid.

5. Do not reach for a product that has fallen into water. Unplug immediately.
WARNING - To reduce the risk of burns, electrocution, fire, or injury to persons:

1. This product should never be left unattended when plugged in.

2. Close supervision is necessary when this product is used by, on, or near children or

invalids.

3. Use this product only for its intended use as described in this manual. Do not use

attachments not recommended by the manufacturer.

4. Never operate this product if it has a damaged cord or plug, if it is not working properly, if

it has been dropped or damaged, or dropped into water. Return the product to a service

center for examination and repair.

5. Keep the cord away from heated surfaces.

6. Never block the air openings of this product or place it on a soft surface, such as a bed

or couch, where their openings may be blocked. Keep the air opening free of lint, hair,

and other similar particles.

7. Never drop or insert any object into any opening or hose.

8. This device is class II equipment with functional earth, no Protective Earth id provided.

(For 120V system only)

NOTE, CAUTION AND WARNING STATEMENTS:

NOTE- Indicates some tips.
CAUTION - Indicates correct operating or maintenance procedures in order to prevent

damage to or destruction of the equipment or other property.
WARNING - Calls attention to a potential danger that requires correct procedures or

practices in order to prevent personal injury.

SYMBOLS

"BF"symbol, indicates this product is according to the degree of protecting against

electric shock for type BF equipment.

The Symbol for class II equipment, 2 concentric square indicating double insulation.

Attention, should read the instructions !

IPX0 Enclosed equipment without protection against ingress of water.

SAVE THIS MANUAL FOR REFERENCE

Advertising