Zebra Technologies P320i - Manual (Page 27)

P320i Plastic Card Printer
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
Appendix C
Your P320i Printer includes a simple cleaning
system using the Pre-Saturated Cleaning Cards
provided. The regular use of these cards will
clean and maintain important parts of your
printer: including the Print Head, and Transport
Rollers. CLEANING
SYSTEM
WHEN TO CLEAN
When LCD screen reports message.
HOW TO CLEAN
1. Leave power on.
Open Cover and release Print Head Bracket to remove ribbon.
Close Print Head bracket.
Close Cover. Remove cards from Card Feeder.
2. Insert one Pre-Saturated Cleaning Card (provided) through slot on the
side of the Card Feeder Cover.
3. Press the right Panel Button for a few seconds. The card will feed into
printer and carry out the cleaning process. Repeat the process with a new
Cleaning Card if necessary.
Although the CLEAN PRINTER message is displayed until the cleaning
process has been performed, the printer will continue to operate.
Note: For a printer cleaning prior to the WHEN TO CLEAN signal, press the
Left Panel Button until the LCD screen shows "CLEANING MENU". Press the
right Panel Button to select and one more time again to run the cleaning
process (Repeat first steps 1 & 2 above).
CLEAN PRINTER
Although the CLEAN PRINTER message is
displayed until the cleaning process has been
performed, the printer will continue to operate.