Yamaha DSP-A595a User Manual
Page 36
36
■
AMP/TUN
Note: TV POWER and TV VOLUME function if you have preset the code for your TV.
1
POWER
This button turns the unit on.
2
INPUT
Press one of these buttons to select the required input source.
3
EXT. DEC.
Press this button when using an external decoder.
4
A/B/C/D/E
Press this button to select a group of preset stations when
using the YAMAHA tuner.
5
DSP
Press this button. While the indicator is lit up for about three
seconds, select a DSP program by using the number buttons (1
to 8). No DSP program can be selected after the indicator goes
off.
6
PRESET (+/–)
Press these buttons to select the preset station number when
using the YAMAHA tuner.
7
VOLUME ( )
Press these buttons to adjust the volume level.
8
MUTE
Press this button to mute the sound. To cancel mute, press this
button once more, or press the operation buttons of this unit.
9
SLEEP
Press this button to set the SLEEP timer.
0
(LEFT), (RIGHT)
These buttons are used to adjust the settings of the SET MENU
mode and the TIME/LEVEL mode.
q
TIME/LEVEL
Press this button to set the unit in the TIME/LEVEL mode and to
select the item.
w
STANDBY
Press this button to set this unit in the standby mode.
e
TEST
Press this button to output a test tone for adjusting the output
level of the speakers.
r
EFCT (EFFECT) ON/OFF
Press this button to turn on or off the DSP program which
includes the Dolby Pro Logic decoder, the Dolby Digital
decoder and the DTS decoder.
t
(NEXT), (BACK)
These buttons are used to advance or back one selection in the
SET MENU mode and TIME/LEVEL mode.
y
SET MENU
Press this button to set the unit in the SET MENU mode and to
select functions.
2
DSP program
Press one of these buttons to select the required DSP program
(1 to 8). When you select the input source, set the SELECTOR
DIAL to the AMP/TUN position.
Note: The function of all buttons other than DSP program is
the same as that with the AMP/TUN position.
w
1
2
3
7
5
4
8
9
r
e
y
t
q
0
6
2
■
DSP
Indicator:
Flashes in red
when the button
is pressed.
Indicator window:
Displays the names of
components which
can be controlled.
SELECTOR DIAL:
Selects the
position for the
component to be
controlled.
The lightly marked buttons do not function.
TV VOLUME
TV POWER
01DSP-A595a-6
6/24/99, 12:15 PM
36