Yamaha DPX-830 - Manual (Page 17)

13
◆ HDMI or DVI connections
You can project high-quality images by connecting the HDMI input terminal of this projector to video equipment having a HDMI output
terminal or a DVI-D output terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video data that are
output from DVD players.
• HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt digital video data for the
purpose of copy protection.
• HDMI (High-Definition Multimedia Interface) is fully backward compatible with computers, displays and consumer electronics equipments
incorporating the DVI standards.
• Depending on the video equipment you wish to connect, this projector may not display any image or not operate correctly. In such cases,
refer to the instruction manual for the connected video equipment.
When you connect this projector and DVI-Digital equipment (such as DVD player) by using the HDMI
terminal or DVI-D terminal, black color may appear light and pale depending on the type of the connected
equipment.
• This depends on the black level setting of the connected equipment. There are two kinds of methods to digitally transfer image data, in
which different black level settings are employed respectively. Therefore, the specifications of the signals output from DVD players differ
depending on the type of the digital data transfer method they use.
• Some DVD players are provided with a function to switch the methods to output digital signals. If your DVD player has such function, set it
as follows:
EXPAND or ENHANCED NORMAL
• Refer to the instruction manual of your DVD player for details.
• When your digital equipment does not have such function, adjust the BRIGHTNESS to +16 and CONTRAST to -17 in the IMAGE menu of
this projector, or adjust the black color by viewing the image.
◆ D-SUB connections
You can project high-quality images by connecting the D-SUB terminal of this projector to video equipment having a D-SUB output terminal
or BNC terminal.
• Use the supplied RGB cable when connecting the projector and the equipment.
• For video equipment having a BNC terminal, use a commercially available BNC to D-SUB cable when connecting to this projector.
SERIAL
D-SUB
USB
AC IN
TRIGGER
HDMI
Equipment having a DVI-D terminal
DVI-HDMI conversion cable
(commercially available)
To HDMI terminal
To DVI-D terminal
Equipment having a HDMI terminal
HDMI cable (commercially available)
To HDMI terminal
SERIAL
D-SUB
USB
AC IN
TRIGGER
HDMI
Equipment having a D-SUB terminal Equipment having a BNC terminal
To D-SUB terminal To BNC terminal
RGB cable
BNC to D-SUB cable (commercially available)
To D-SUB terminal