ZyXEL Communications NBG410W3G Series User Manual
Page 43
NBG410W3G Support Note
All contents copyright (c) 2008 ZyXEL Communications Corporation.
43
Step 1. Please plug the 3G SIM card into the SIM slot of NBG410W3G before powering on the NBG410W3G.
Then, login the GUI of NBG410W3G. The default IP address is 192.168.1.1. In the following figure, we can
see the status of WAN links. In this picture, we can see that there is no link in both of WAN1 and WAN2.
Step 2. Now, you need to initialize the setting of 3G. Please click Wireless> 3G(WAN2) to configure more
detailed parameters. For examples, you need to configure the APN, username, password, PIN code, phone
number, the authentication type and other settings you have got from your service provider. Click the Apply
button. After finish your setting, please click the APPLY button to activate all the setting. Finally, reboot your
system.