ZyXEL Communications NBG410W3G Series - Manual (Page 45)

NBG410W3G Support Note
All contents copyright (c) 2008 ZyXEL Communications Corporation.
45
Step 3. After rebooting your system, please login the GUI. In the homepage of GUI, you can see information of
3G WAN interface. But we have not active WAN2 link yet. You need to click “DIAL＂ to activate the 3G
link. Furthermore, you can see the 3G card information under the wireless category. Make sure there is no
"Error" message in "3G Card IMEI" and "SIM Card IMSI" fields. Otherwise, you need to re-install the 3G card
and the SIM card and make sure they are properly installed. Please refer to the quick start guide if you need to
troubleshoot because of an error message.