Xantech PA1235X - Manual (Page 13)

Model PA1235X Page 13
© 2002 Xantech Corporation.
SPECIFICATIONS
Number of channels 12
Power Output
Rated continuous power, each channel, all 12 channels
simultaneously driven, 20 Hz to 20kHz, at rated THD
35 Watts at 8 Ohms
Power Output
Short term continuous, each channel, 2 channels driven,
1 kHz, at rated THD
55 Watts at 8 Ohms
80 Watts at 4 Ohms
Bridged Power Output
Short term continuous, one pair driven at 1 kHz, at rated THD
150 Watts at 8 Ohms (80 Watts continuous)
Rated THD < 0.08%
Damping Factor
at 50 Hz, half rated power
> 100
S/N Ratio
A-weighted, shorted inputs, ref to rated power
> 100 dB
Frequency Response
at 1 Watt, ± 3dB
12 Hz to 55 kHz
Input Sensitivity
at rated power, stereo mode
Max: 0.5 V
Default: 1.0 V
Minimum: Off
Input Impedance Local Inputs: 22 kOhms
Power Source 120 VAC, 60 Hz
240 VAC, 50 Hz (European version)
Power Consumption No signal: 30 Watts (0.25/0.13 A)
12 Channels at 1/10 rated power: 360 Watts (3.0/1.5 A)
12 Channels at rated power: 1044 Watts (9.1/4.6 A)
6 Channels Bridged at 8.5 Watts/Chan: 720 Watts (6.0/3.0 A)
Remote On/Off and
CI Voltage/Current +5 V to +30 VDC (16 mA at +12 VDC)
Line Fuse Rating 120 V version: 10 A Slow Blow 220 VAC.
TMRA 30° Celsius. If this temperature is exceeded, you will
need to provide additional ventilation to insure proper
operation.
240 V version: 5 A Time-Lag 250 VAC
Dimensions 19” W x 5.25” H x 15.5” D
(483 mm W x 133 mm H x 394 mm D)
Weight 36.85 lbs (16.7 kg)