Yazoo/Kees KIKW36150 - Manual (Page 20)

20
TROUBLE SHOOTING GUIDE
PROBLEM POSSIBLE CAUSES
Engine won’t start
Mower will not move
or moves slowly or hard
1. Blade switch engaged.
2. Thumb latches unlocked.
3. Fuel valve closed.
4. No fuel.
5. Spark plug wires off.
6. Bad spark plugs.
7. Bad module.
8. Fuse blown.
1. Brake/bypass lever in brake or bypass position
2. Pump drive belt loose or off.
4. IZT failure.
5. brake/bypass lever mis-adjusted.
Blades won’t engage
Uneven cut
Cut is ragged
Mower moves when
in neutral position
Mower pulls left or right
When a problem occurs, do not overlook the simple causes.
1. Tire pressure uneven.
2. Motion control linkage adjustment.
3. Soft terrain.
4. Slope too steep.
5. Tracking not adjusted.
6. Bypass is mis-adjusted on one side.
1. Motion control linkage out of adjustment
(see adjustments).
1. Blades dull.
2. Ground speed too fast.
3. Grass accumulation under deck.
1. Tire pressure uneven.
2. Blades bent (check tip to tip one blade thickness)
3. Air foil of blade worn or bent.
1. Blade belt off of pulleys.
2. Blown fuse.
3. Bad module.