Preparations and connections Ⅵ antenna connection, Connecting external components, 1) supplied fm antenna – Yamaha GX-500VCD User Manual

Page 14: 2) supplied am loop antenna, Using an external antenna

Advertising
background image

E-6

R

L

ANTENNA

75

UNBAL.

FM

GND

AM

DEGITAL OUT

OPTICAL

R

L

OUT

IN

SEE OWNE
FOR CONN

FRONT

SPEAKERS

6

MIN./

AUX/MD

TV MODE

PAL

NTSC

AUTO

SUBWOOFER

VIDEO SIGNAL

MONITOR

OUT

Preparations and connections

Antenna connection

(1) Supplied FM antenna

Connect the FM antenna wire to the corresponding terminal
and direct the FM antenna wire to the direction where the
strongest signal can be received.

(2) Supplied AM loop antenna

Connect the AM loop antenna wires to the corresponding
terminals. Position the AM loop antenna for optimum
reception.

Notes

When static is still heard even after adjusting the position of
the AM loop antenna, try reversing the wire connections
(from the right terminal to the left one, and vice versa).

The AM loop antenna should be placed apart from the main
unit. The antenna may be hung on a wall.

Using an external antenna

Use an external FM antenna instead of an indoor FM
antenna if you need better reception. Consult your dealer.

Use an external AM antenna if you need better reception.
Consult your dealer.

(1)

(2)

ANTENNA

75

UNBAL.

FM

GND

AM

ANTENNA

75

UNBAL.

FM

GND

AM

DIGITAL OUT

OPTICAL

ANTENNA

75

UNBAL.

FM

GND

AM

Connecting external components

TV monitor
Connect a TV monitor to enjoy playing Video CDs on the built-
in CD/Video CD player. Connect a TV monitor to the
MONITOR OUT terminal by using an RCA pin plug cable.

External audio commponent
This system can be connected with external audio
components. Connect an external audio component to the
AUX/MD terminals by using RCA pin plug connector cables
correctly, that is to say L (left) to L and R (right) to R.
Also, refer to the owner’s manual for the component to be
connected to this system.
* A digital-to-digital recording is possible from a CD played on

the built-in CD/Video CD player to an MD (or tape) on an
external MD recorder (or DAT) by connecting the DIGITAL
OUT (OPTICAL) terminal on the rear of the main unit to the
MD recorder (or DAT).

MD recorder etc.

IN

OUT

DIGITAL IN

TV monitor

VIDEO IN

(Singapore model)

(Singapore model)

Advertising