York MPADC - Manual (Page 3)

INSTALLATION, OPERATION & MAINTENANCE MANUAL
Multi-Pure
Water Guardian Drinking Water
Appliance
The Multi-Pure Water Guardian Drinking Water Appliance, Model
MPADC is designed for use on the countertop next to your sink.
You can connect it to your existing faucet using the high-tech
chrome diverter valve that allows you to easily switch from filtered
to unfiltered water.
NOTE: The filter cartridge is factory-installed inside the unit housing.
Step 1 Determine a desired location on your countertop for the
unit so that the hose can easily be attached to your
faucet.
Step 2 Inspect the unit housing to confirm that the housing top
is securely connected to the bottom. If necessary,
use the hand tool, shipped with the unit, to tighten the
top.
a. With the housing in an upright position, slide the hand
tool over the top so that the ridges on the tool fit into
the grooves on the housing top.
b. Applying steady pressure, turn clockwise to tighten.
Hold the base in place on the countertop while turning
the top.
c. Tighten sufficiently so that the o-ring at the bottom of
the top is not visible. DO NOT OVER TIGHTEN.
housing top
hand tool
housing
base
turn to close
II. Inspect the Housing
3