Xtant 302A - Manual (Page 5)

SAFEGUARDS
Please take the time to read this Owners Manual.
The following guidelines are designed to assure a safe and
properly installed Xtant Mobile Audio System .
All Xtant amplifiers and accessories are intended to be installed by a certified
professional mobile audio installation specialist. It is the recommendation of
Xtant Technologies that your new Xtant product(s) and all of your mobile
audio products be installed by your Authorized Xtant Dealer.
Caution!
The use of a high-powered, mobile audio sound system may cause damage or
a loss of hearing. Listening at loud volume levels may impair your ability to
hear traffic sounds, and therefore, may constitute a traffic hazard. Xtant advis-
es lower volume levels while driving.
Installer’s Reference (insert)
The Installer’s Reference is an insert included in this manual. It is designed to
assist your Authorized Xtant Select Dealer’s professional installer.
Installation techniques critical to the creation of a high-performance mobile
audio sound system, (procedures for running wires, basic safety rules, and
system layout concepts) are not presented in this owners manual. All
Authorized Xtant Select Dealers have been chosen for their expertise in sys-
tem design and advanced installation capabilities and Xtant highly recom-
mends that you have all of your mobile audio products professionally
installed. If, however, you choose to install your Xtant amplifier yourself,
please refer to the Installer’s Reference prior to installation.
Wiring Requirements
All Xtant amplifiers have minimum wire gauge requirements for Power,
Ground, Remote Turn-On, and Speaker cables. Please refer to the Installer’s
Reference for recommended wire gauges.
Fusing Requirements
The 302a is not fuse protected! For safety, an outboard 50 amp fuse may be
added close to the amplifier. A 50 amp fuse must be installed in-line with the
power wire at the battery. In the case of a multi-amp system, use a fuse value
equal to the combined total demand of all amplifiers in the system.
Water and Moisture
Install all Xtant amplifiers and accessories in a location free of
moisture or exposure to water.
4