Xtant 302A - Manual (Page 7)

Xtant 302a SPECIFICATIONS
Frequency Response 5 Hz to 50 kHz +/– 3 dB
Number of Channels 2
Watts per Channel @ 4
Ω
2 x 75
Watts per Channel @ 2
Ω
2 x 150
Bridged Mono @ 4
Ω
1 x 300
Distortion (THD) < .04%
Signal to Noise Ratio > 100 dB
Damping Factor > 200 @ 100 Hz with 4
Ω
Load
Input Sensitivity 100 mV to 8.5 V RMS Unbalanced Source
100 mV to 17 V RMS Balanced Source
Input to Line Output Gain 0 dB +/– 20 dB, Selectable in 10 dB Steps
Line Outputs: Yes
Module Ports 2 for Amplifier and 1 for Line Outputs
Crossover CM12HP Included
Power Supply Fully Regulated, Pulse Width Modulated
Operational Voltage 11 to 15 Volts
Fusing No On-Board Fuse
Fusing Requirement 50 Amp
Size (L x W x H) 14.5 x 7.6 x 2.25”
Warranty Limited 4 Year Parts and Labor
S E E P A G E E L E V E N O F T H I S M A N U A L F O R C O M P L E T E D E T A I L S
6