Xerox 701P44148 - Manual (Page 101)

FreeF low Scanner 665E Operator Manual 4-11
4. Advanced Scanning
Calibrate Scanner
Calibrate the scanner whenever you notice a degradation in image
quality or consistency.
Scanner calibration may be done any time the scanner is not in a
"busy" state. This is discussed in more detail in the System
Administration Guide, chapter 4. Hardware maintenance,
“Calibrate Scanner” on page 4-12.
Fast Preview
The Fast Preview feature is activated and deactivated by clicking
the item on the Options menu. When active, a checkmark
appears next to the feature name.
Fast Preview samples the image at a lower resolution than your
chosen print resolution. This is sufficient for setting Crop and
Frame margins. However, for adjusting Image Quality settings,
you should first deactivate the Fast Preview feature. The Preview
window will then display your image at the actual print resolution.
Single Page Mode
Enable Single Page Mode: This option is available only when scanning black and white
documents and the Document feeder is selected.
Automatically Preview Next
Image:
When using the document feeder in the single page mode, this
feature automatically feeds and displays a preview of the next
page in a stack whenever the Next or Skip buttons are pressed
for the current image.