Zanussi ZKT 652 DX - Manual (Page 28)

28
Using the timer
All cooking zones can use each use one of the two
timer functions at the same time.
3
If a cooking zone is switched off, the timer
function set is also switched off.
3
If a heat setting is set on this cooking zone in
addition to a countdown timer, the cooking
zone is switched off after the time set has
elapsed.
Selecting a cooking zone
3
The heat setting indicator of the selected
cooking zone goes out, as long as the timer
time can be set.
3
If the pilot light is flashing more slowly, the
heat setting indicator appears again and the
heat setting can be re-set or modified.
3
If other timer functions are set, after a few sec-
onds the shortest remaining time of all the tim-
er functions is displayed and the
corresponding pilot light flashes.
Function Condition Outcome after the time has
elapsed
Automatic cut-out a heat setting is set acoustic signal
00 flashes
Cooking zone switches off
Countdown timer cooking zones not in use acoustic signal
00 flashes
Step Control panel Display
1. Touch once Pilot light of the first cooking zone flashes
2. Touch once Pilot light of the second cooking zone flashes
3. Touch once Pilot light of the third cooking zone flashes
4. Touch once Pilot light of the fourth cooking zone flashes