Tips on cooking and frying 3, Safety cut-out – Zanussi ZKT 652 DX User Manual
Page 30
30
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat
setting is not set for a cooking zone within approx.
10 seconds, the cooking surface automatically
switches itself off.
• If all cooking zones are switched off, the cooking
surface automatically switches itself off after ap-
prox. 10 seconds.
Control panel
3
Moisture (e.g. a wet cloth) or liquid boiling over
onto the control panel immediately switches
all cooking zones off.
Induction cooking zones
• In the event of overheating (e.g. when a pan boils
dry) the cooking zone automatically switches itself
off.
is displayed. Before being used again, the
cooking zone must be set to 0 and allowed to cool
down.
• If cookware that is not suitable is used, flashes
in the display and after 2 minutes the display for
the cooking zone switches itself off.
• If one of the cooking zones is not switched off after
a certain time, or if the heat setting is not modified,
the relevant cooking zone switches off automati-
cally. is displayed. Before being used again, the
cooking zone must be set to 0.
Tips on cooking and frying
3
Information about acrylamides
According to the latest scientific research, in-
tensive browning of food, especially in prod-
ucts containing starch, may present a health
risk due to acrylamide. Therefore we recom-
mend cooking at low temperatures and not
browning foods too much.
Heat setting
Switches off after
V, 1 - 2
6 hours
3 - 4
5 hours
5
4 hours
6 - 9
1.5 hours