Yamaha RX-V2090 - Manual (Page 29)

29
The following adjustments can be done on the remote control transmitter as well as on the front panel.
Adjustment of the FRONT LEVEL
You can “fine-tune” the sound output level of the
front effects speakers after setting the output level
according to the instructions in “Speaker balance
adjustment” on page 16.
LEVEL
FRONT
Press the “+” or “–” FRONT LEVEL key on the
remote control transmitter. As you change the volume
level, the front panel LCD will display the value. If
you press the “+” or “–” key continuously, the level
will continuously change except for a momentary
pause at the preset point (80).
• Once the output level is adjusted, the level value
will be the same in all the digital sound field
programs.
Note:
When 5 CH DISCRT or DOLBY PRO LOGIC is used, the
FRONT LEVEL control will not function.
Adjustment of the CENTER LEVEL
You can adjust the sound output level of the center
channel speaker even if the output level is already set
in “Speaker balance adjustment” on page 16.
CENTER
LEVEL
Press the “+” or “–” CENTER LEVEL key on the
remote control transmitter. As you change the volume
level, the front panel LCD will display the value. If
you press the “+” or “–” key continuously, the level
will continuously change except for a momentary
pause at the preset point (80).
• The center channel speaker is used only in DOLBY
PRO LOGIC, DOLBY PRO LOGIC ENHANCED,
70 mm MOVIE THEATER, TV THEATER, SPORTS
and 5 CH DISCRT modes.
• Once the output level is adjusted, the level value
will be the same in all the digital sound field
programs.
Note:
If the digital sound field program STADIUM, ROCK
CONCERT, JAZZ CLUB, CHURCH, or CONCERT
HALL is selected, the CENTER LEVEL control will not
function.
Adjustment of the REAR LEVEL
You can adjust the sound output level of the rear
speakers even if the output level is already set in
“Speaker balance adjustment” on page 16.
REAR
LEVEL
Press the “+” or “–” REAR LEVEL key on the remote
control transmitter, the level value changes continu-
ously. However, the value stops changing momen-
tarily at the preset point (80).
• Once the output level is adjusted, the level value
will be the same in all the digital sound field
programs.