Instrument and control functions – Yamaha XVS13AW(C) User Manual

Page 22

Advertising
background image

INSTRUMENT AND CONTROL FUNCTIONS

3-5

3

serve tripmeter mode “F-TRIP” and
start counting the distance traveled
from that point. In that case, push the

” side of the “SELECT” switch to

switch the display between the various
tripmeter, odometer, and clock modes
in the following order:
F-TRIP

→ TRIP 1 → TRIP 2 → Clock

→ ODO → F-TRIP

NOTE:

Push the “

” side of the “SELECT”

switch to switch the display in the re-
verse order.

To reset a tripmeter, select it by push-
ing the “

” or “

” side of the “SE-

LECT” switch, and then push the
“RESET” switch for at least one sec-
ond. If you do not reset the fuel reserve
tripmeter manually, it will reset itself au-
tomatically, and the display will return
to the prior mode after refueling and
traveling 5 km (3 mi).

Clock mode

Push the “RESET” switch for less than
one second to display the clock for five
seconds, regardless of the currently se-
lected display mode.

To set the clock:

1. Push the “

” or “

” side of the

“SELECT” switch to change the
display to the clock mode.

2. Push the “

” side of the “SE-

LECT” switch and the “RESET”
switch together for at least two
seconds.

3. When the hour digits start flashing,

push the “

” or “

” side of the

“SELECT” switch to set the hours.

4. Push the “RESET” switch, and the

minute digits will start flashing.

5. Push the “

” or “

” side of the

“SELECT” switch to set the min-
utes.

6. Push the “RESET” switch and then

release it to start the clock.

Self-diagnosis devices
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
engine trouble warning light will come
on, and then the odometer/tripme-
ter/clock display will indicate a two-digit
error code (e.g., 12, 13, 14).
If the odometer/tripmeter/clock display
indicates any error codes, note the
code number, and then have a Yamaha
dealer check the vehicle.

CAUTION:

ECA11590

If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.

1. Clock

U3D810E0.book Page 5 Wednesday, July 19, 2006 11:14 AM

Advertising