2 time setting, Figure 120 system > time setting – ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual
Page 229
P-793H User’s Guide
Chapter 17 System
229
17.2 Time Setting
To change your ZyXEL Device’s time and date, click Maintenance > System > Time
Setting. The screen appears as shown. Use this screen to configure the ZyXEL Device’s time
based on your local time zone.
Figure 120 System > Time Setting
Old Password
Type the default administrator password (1234) or the existing password you use to
access the system for configuring advanced features in this field.
New Password
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the ZyXEL Device.
Retype to
Confirm
Type the new password again for confirmation.
Apply
Click Apply to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 80 System > General (continued)
LABEL
DESCRIPTION