Zanussi ZT 617 - Manual (Page 10)

10
PCE05GB
Loading your Machine
Before placing dishes in the machine, remove any
scraps of food from the plates (small bones,
toothpicks, fish bones, scraps of meat and vegetables,
fruit skins etc.) to avoid clogging the filters and
consequently reducing performance.
Open the door and slide out the baskets to load the
dishes.
Use of the Lower Basket
The lower basket is designed to take saucepans, lids,
plates (up to 27 cm in diameter), salad bowls, cutlery
etc.
Serving dishes and large lids should be arranged
around the edge of the basket, ensuring that the up-
per spray arm can turn freely.
Cutlery should be placed in the removable cutlery
basket with the handles facing downwards. If the
handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with
the handles facing upward.
Mix spoons with the other cutlery to prevent them
sticking together.
Teaspoons may be loaded into the special slots
provided in the cutlery basket handle.
The cutlery basket is in
two parts which can be
separated to give greater
loading flexibility. To separate
the two parts, slide them hori-
zontally in opposite directions
and pull them apart. To re-
assemble, reverse the proce-
dure.
The two rear rows of
prongs on the lower basket
can be easily lowered to al-
low you to load pots, pans
and bowls.
To lower the prongs:
slightly pull them upward
and let them drop down
(see picture); to bring them
back to the standing position, just pull them up again.
Use of the Upper Basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates up to 24 cm in diame-
ter), salad bowls, cups and glasses; these should be
arranged as shown in the pictures. Glasses with long
stems can be placed upside-down in the raised cup-
racks.
UI22
IEC 436 / DIN 44990
IEC 436 / DIN 44990 US22
UI21
UI18
UI07