The electrical connections – Zanussi ZT 617 User Manual

Page 5

Advertising
background image

The electrical connections

WARNING: THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should
this safety measure not be observed.

If the plug that is fitted to your appliance is not
suitable for your socket outlet, it must be cut off and
the appropriate plug fitted.

Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent
the hazard of shocks in case it should be plugged into
a 13 amp socket in another part of your home.

Important

The wires in the mains lead are coloured in accor-
dance with the following code:

Green and Yellow

- Earth

Blue

- Neutral

Brown

- Live

If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug,
proceed as follows:

Connect the Green and Yellow (earth) wire to the ter-
minal in the plug which is marked with the letter «E»
or the earth symbol

or coloured green and yellow.

Connect the Blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.

Connect the Brown (live) wire to the terminal in the
plug which is marked with the letter «L» or coloured
red.

The plug moulded onto the lead incorporates a fuse.
For replacement, use a 13amp BSI362 fuse.
Only ASTA or BSI approved fuses should be used.

The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured in-
sert at the base of the plug.

A replacement cover/carrier must be obtained from
your local Zanussi Service Force Centre whose
address is listed in the Customer Care Booklet which
accompanies your instruction manual.

This appliance complies with the follow-
ing E.E.C. Directives:

- 73/23 of 19.2.73 (Low Voltage Directive) and sub-
sequent modifications;

- 89/336 of 3.5.89 (Electromagnetic Compatibility
Directive) and subsequent modifications.

Please ensure that when the appliance is installed
it is easily accessible for the engineer in the event
of a breakdown.

PIN08GB

5

13 AMP

GREEN & YELLOW

13 AMP FUSE

BROWN

CORD CLAMP

BLUE

CE01

Advertising