Yamaha RX-V450 - Manual (Page 28)

24
BASIC SETUP
■ To balance the speaker levels
Perform the following steps after step 13 (see page 23).
The unit outputs the test tone from the selected speaker
and the left front (or left surround) speaker in turn. The
indicator of the speaker currently outputting the test tone
flashes in the front panel display.
1
Press d / u to select a speaker, then use j / i
to adjust the balance.
FR-----||-----
Adjusts the balance between the front left and right
speakers.
C-----||-----
Adjusts the balance between the front left and center
speakers.
SL-----||-----
Adjusts the balance between the front left and
surround left speakers.
SB-----||-----
Adjusts the balance between the surround left and
surround back speakers.
SR-----||-----
Adjusts the balance between the surround left and
surround right speakers.
SWFR-----||-----
Adjusts the balance between the front left speaker
and the subwoofer.
2
Press SET MENU to exit after balancing the
speakers.
y
You can also balance the speaker levels using test tone by
pressing TEST on the remote control.
CD TUNER MD/CD-R DVD
HiFi DSP
DTV/CBL V-AUX VCR 96
24
q PL q EX
MATRIX DISCRETE SILENT CINEMA NIGHT ZONE2 PTY HOLD AUTO
PS RT CT EON PTY
TUNED STEREO MUTE VOLUME MEMORY
SLEEP
VIRTUAL
PCM
q PL q PL x
A B
SP
ft
mS
dB
dB
96/24
LFE
L R
SB
q DIGITAL
t
FR-----||-----
C
SL SR
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
00_RXV450_U_EN.book Page 24 Monday, February 16, 2004 7:03 PM