Yamaha RX-V450 - Manual (Page 57)

53
English
REMOTE CONTROL FEATURES
A
D
V
ANCED
OPERA
T
ION
■ Clearing a setup manufacturer code for
component control
1
Press an input selector button or / to
select the component control for which you
want to clear the manufacturer code.
2
Press CODE SET using a ballpoint pen or
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
3
If you do not press any button within 30
seconds after step 2, the clearing process is
canceled. If this happens, start over from
step 1.
4
Enter the code number “0000”.
The TRANSMIT indicator on the remote control
flashes twice, and the manufacturer code for the
selected component is cleared.
y
You can clear all setup manufacturer codes at once by entering the
code number “9990”.
Clearing setup manufacturer codes
CD MD/CD-R TUNER
V-AUX DVD
AMP VCR
DTV/CBL MULTI CH IN
SLEEP
TRANSMIT
CODE SET
00_RXV450_U_EN.book Page 53 Monday, February 16, 2004 7:03 PM