Redball Electrical 565 - Manual (Page 43)

3-07
565 Trailer Sprayer - Storage
Section D
c. One at a time, turn on each of the boom
sections to allow the antifreeze solution to
be pumped through the controls and the
boom valves. Run enough solution that
the antifreeze begins to spray out the
boom sections.
d. Turn off the solution pump. Cycle the
spray boom valves open and closed to
allow the antifreeze solution that is
trapped in the hoses to drain back.
Remove the strainers, clean and reinstall.
5. If the sprayer is equipped with an eductor or foam
marker, these must be winterized as well.
6. Verify that the antifreeze solution has been circulated
through the whole system.
7. Disconnect the electrical connections. Apply a coating
of dielectric grease to the terminals to help
prevent corrosion.
8. Inspect the complete machine for necessary repairs,
grease all fittings and lubricate moving parts.
4
Section D