Zanussi ZCE 611 - Manual (Page 8)

8
24 Hour Clock and Timer
STOP
SET
TIME
PUSH
BOTH
1 2
A
U
T
O
1. DECREASE CONTROL ( )
2. INCREASE CONTROL ( )
COOKPOT SYMBOL ( )
PUSH BOTH CLOCK SETTING SYMBOL ( )
CHILD SAFETY SYMBOL ( )
Fig. 1
Fig. 2
STOP
SET
TIME
PUSH
BOTH
A
U
T
O
STOP
SET
TIME
PUSH
BOTH
Setting the time of day
When the power supply is first switched on, or after a
power failure, 0.00 and AUTO will flash alternatively in the
display.
To set the correct time of day:
1. Press button “ ” and “ ” together (See Fig. 1).
2. Release buttons, then press button “ ”: 12.00 will
show in the display (See Fig. 2).
3. Within 5 seconds press and hold either button “ ”
to increase or button “ ” to decrease the time until
the correct time of day on the 24 hour clock is reached.
To reset the correct time of day:
1. Press button “ ” and “ ” together. Then press and
hold either button “ ” to increase or button “ ” to
decrease the time until the correct time of day on the
24 hour clock is reached.
NOTE: The increase and decrease control buttons
operate slowly at first and then more rapidly. They
should be pressed separately.