Zanussi ZVH 66 F - Manual (Page 11)

11
Power Management
The appliance has a maximum power output. If
this maximum power is exceeded, the Power
Management automatically reduces the power
of the last cooking zone to be switched on.
This can happen by:
•
switching on another cooking zone
• switching on an outer ring, when other cook-
ing zones are already switched on at high
settings
• increasing the heat setting on a cooking
zone, when other cooking zones are already
switched on at high settings
The display for the last cooking zone to be
switched on alternates for 1 minute between
the heat setting set and the maximum possible
heat setting. During this period it is not possible
to increase the heat setting. Thereafter the ac-
tual heat setting is displayed.
Example: heat setting 9 is selected on a cook-
ing zone. Heat setting 9 is also set for another
cooking zone. If this exceeds the maximum out-
put, the Power Management reduces the power
of the last cooking zone to be switched from 9
to 7, for example, and the display for this cook-
ing zone alternates between 9 and 7 and then
remains on the current maximum of 7. (Wheth-
er the display alternates between 9 and 7 or 9
and 6 or other values, depends on the appli-
ance type and the size of the cooking zone.)