Yamaha VCD-102K - Manual (Page 17)

1
The disc number and the track number of the last
selection will flash on the display.
2
Display the disc number and the track number to be
canceled.
3
Press once while the number is flashing.
17
English
Notes
● The SEARCH buttons can be used during play to search all
tracks including tracks not programmed. ● When programs consist of tracks from more than one disc, if
you change a disc by using the PLAYXCHANGE button, the
programmed track on the removed disc is replaced by the
same numbered track on the new disc.
If the same number of the programmed track does not exist
on the new disc, the program will substitute the highest-
numbered track on the new disc.
EXAMPLE:
Program Swap disc 4 (new disc has 9 tracks only)
Disc 1, Track 5 Disc 1, Track 5
Disc 2, Track 8 Disc 2, Track 8
Disc 4, Track 12 Disc 4, Track 9
To cancel a programmed selection To cancel the selection you are currently
programming
There are two methods, as described below.
1) Press the CANCEL button instead of the ENTER button
after the track number is selected.
2) If about 30 seconds pass with no operation after the track
number is selected, the track will not be programmed.
To cancel all program data
Switch off the power.
CANCEL
SKIP PREV NEXT
ENTER
KEY CONTROL
KARAOKE MPX
OPEN/CLOSE
ON SCREEN
PROG ENTER S/F REP CANCEL
1 2 3 4 5
6 7 8 9 0
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP PREV
RETURN SELECT
NEXT
INTRO DIGEST
PAUSE SLOW PLAY/REPEAT STOP
2
1 3