Yamaha VCD-102K - Manual (Page 4)

VIDEO OUT
MODE
SELECT
AUTO
NTSC PAL
L
R
LINE OUT VOLTAGE SELECTOR
VIDEO IN
CD
240V
110V
120V
220V
4
CONNECTIONS
● Before making any connections, switch OFF the power to
this unit, the amplifier, the video monitor, etc.
● Connections should be made to the correct input terminals
of the amplifier, the video monitor, etc.
● If the placement of this unit causes interference to other
equipment, separate them from each other.
To AC outlet
This unit
(General model)
Amplifier
Video connection cord (included)
Connecting to the amplifier
Connect the LINE OUT terminals to the audio input terminals of
the amplifier (marked as “CD”, “AUX”, etc.) by using the
included audio connection cord.
Be sure that the left (“L”) and right (“R”) LINE OUT terminals
are connected to the corresponding (left and right) terminals of
the amplifier.
Connecting to the video monitor
Connect this unit’s VIDEO OUT terminal to the video input
terminal of the video monitor by using the included video
connection cord.
Audio connection
cord (included)
Video monitor