Yamaha PLG150-VL - Manual (Page 17)

17
Selecting Voices
When a VL voice is selected VL voice icon will be displayed on the LCD.
You may unintentionally select a bank number of the “mother” tone generator. Be sure to confirm that
the VL voice icon is displayed on the LCD.
4
Press SELECT button to place the cursor at the Program Number.
5
Press VALUE button to select the Program Number (voice) you want to
use.
If an invalid Program Change Number is selected while one of the VL-XG Banks (112–119) is chosen,
VL voice icon will be replaced with one of the XG voice icons.
■ Designating the Part for the VL Voice
1
Press UTIL button to enter the Utility Mode.
2
Press SELECT button to place the cursor at PLUGIN.
3
Press ENTER.
The following display appears.
(If necessary) Press SELECT button to place the cursor at PLG150-VL.
4
Press ENTER.
The System Parameter Edit display exclusive to the PLG150-VL appears.
(If necessary) Press SELECT button to place the cursor at Part Assign.