Yamaha PLG150-VL - Manual (Page 19)

19
Editing VL Voice Part Parameters
Modular Synthesis Plug-in System
The example displays used in the following explanations are all taken from the CS6x.
●
See the manual of the synthesizer how to save the edited voices.
●
The VL-XG voices edited using XG Editor Window of the "XGworks lite" can be saved as a part of the song
data.
1
Select the desired VL voice, as described in "Selecting Voices" on page 15.
2
Press the EDIT button.
The EDIT menu display appears.
3
Turn knob A clockwise until "Elem" is shown at the bottom left of the dis-
play.
4
Turn the PAGE knob clockwise until "PLG150-VL" is shown at the bottom
left of the display.
The VL part parameters will be displayed above the knob C and knob 2.
5
Use knobs C and 2 to select the desired parameter and change the value.
Once one of the parameters is selected (the arrow cursor appears next to the value), you can also
adjust the value with the DATA knob or the DEC/INC buttons.
The element parameters available on the “mother” synthesizer/tone generator can also be applied to
the VL voices. However, some of them may not be applied to the VL voices.
GEN Name) Ctgry a-Z 0-? Cursor
Common [--:Plug-InVce]
OSC Assign) Bank Number
Elem NORM/000 1[ ]
NTV Param) FilEG Dept Prs CC NO.
PLG150-VL +00 off