Yamaha S80 EN - Manual (Page 22)

Drum Key Dialog
1
Keyboard
Click on the keyboard to specify note assigned to the Element or Voice you are editing.
The text box to the left shows the note name.
2
OSCILLATOR settings
To select a waveform as the source, click the [WAVE] button and then the text box next to it
to select the waveform. To select a voice as the source, click the [VOICE] button and then
the text box next to it to open the “Voice List” dialog. Choose the Memory from the pull-
down menu at the top and choose the Voice from the scrollable list below it. Click the [OK]
button to apply the selection and quit the dialog (or click the [Cancel] button to quit without
selecting).
3
PITCH controls
Use these to set the pitch characteristics of the Element. Use the “VELOCITY” knob to
define how the Element’s pitch varies with note velocity. Use the “COARSE” knob to tune
the Element’s pitch in coarse increments (semitones) and the “FINE” knob to further fine-
tune it.
n
The “VELOCITY” knob is disabled if the oscillator source is set to “VOICE.”
# $ % ^ &
2 1
7
!
@
8
)
9
3 4 5 6
22