Yamaha S80 EN - Manual (Page 26)

System Effects
1
EFFECT SEND controls
The signals from Insertion Effects 1 and 2 are sent to the System Effect section. Use these
knobs to set the level of the signal of Insertion Effect 1/2 (or the by-passed signal) sent to
the Reverb/Chorus effect.
2 [
DETAIL] button
Click this to set the exact parameters for the respective System Effect via the “DETAIL”
dialog.
3
Effect Type selector
Click on the text box and choose the type of Reverb or Chorus Effect.
4
EFFECT PAN controls
Use these knobs to set the stereo positioning of the respective System Effect.
5
EFFECT RTN controls
The signals from both System Effects are combined at the output. Use these knobs to set
the amount of each System Effect that is used in the output signal.
6
CHORUS ➝ REVERB control
Use this knob to set the level of the signal of sent from the Chorus unit to the Reverb unit.
1 2 3
6
4 5
26