Yamaha S80 EN - Manual (Page 28)

OMS Port Setup
Having set up OMS, you now need to start up Voice Editor and set the OMS ports.
1. First, start up Voice Editor by double-clicking its icon.
n If AppleTalk is enabled, you will get an alert message. Click “OFF.” It will take some time for
AppleTalk to be disabled.
2. Choose “OMS Port Setup” from Voice Editor’s “MIDI” menu, then select the port settings. In
the following example, the tone generator is a CS6x and its settings are applied to OMS.
Key Thru: Check this if you are monitoring a sound generator module using an
external keyboard.
MIDI In: Select “CS6x.”
MIDI Out: Select “CS6x.”
3. Click [OK] to close OMS Port Setup.
28