Yamaha YST-SW800 - Manual (Page 9)

English
E-
5
ON
POWER
OFF
BASS
MUSIC NORM MOVIE REV HIGH LOW OFF
PHASE AUTO STANDBY OUTPUT TO SPEAKERS
INPUT 1 INPUT 2 FROM AMPLIFIER
/MONO BASS
MUSIC NORM MOVIE REV HIGH LOW OFF
PHASE AUTO STANDBY OUTPUT TO SPEAKERS
INPUT 1 INPUT 2 FROM AMPLIFIER
/MONO
ON
POWER
OFF
SPLIT SUBWOOFER
OUTPUT
TO SPEAKERS
INPUT
1
INPUT
2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT
1
INPUT
2
FROM AMPLIFIER
/MONO /MONO
Ⅵ
Using two subwoofers
Notes
● Some amplifiers have line output terminals labeled PRE OUT.
When you connect the subwoofer to the PRE OUT terminals of
the amplifier, make sure that the amplifier has at least two sets
of PRE OUT terminals. If the amplifier has only one set of
PRE OUT terminals, do not connect the subwoofer to the PRE
OUT terminals. Instead, connect the subwoofer to the speaker
output terminals of the amplifier. (Refer to pages 6 and 7.)
● When connecting to a monaural line output terminal of the
amplifier, connect the L/MONO INPUT2 terminal.
● When connecting to line output terminals of the amplifier,
other speakers should not be connected to the OUTPUT
terminals on the rear panel of the subwoofer. If connected,
they will not produce sound.
Subwoofer
Amplifier
To AC outlet
Pin plug cords (not included)
Left main speaker Right main speaker
Subwoofer
To AC outlet