ZyXEL Communications STB-2101H - Manual (Page 4)

4
Hardware Connections
Take the following steps to set up your STB-2101H’s hardware
connections. Use either the cables that came with your STB-2101H, or
those that came with your TV or Internet access device.
1. Connect your TV (and audio system, if required) to the STB-2101H’s
audiovisual ports using either the included cables or those that came
with your TV. Refer to the next figure for some example connections.
2. Connect your Internet access device (such as a broadband modem or
router) to the STB-2101H’s RJ-45 port.
3. Using the included power adaptor, connect the STB-2101H’s POWER
port to a suitable power source.
1 2 3