ZyXEL Communications STB-2101H - Manual (Page 6)

6
2. Press the ON/OFF button on the rear of the STB-2101H.
The Power LED on the front of the STB-2101H lights up. It blinks
while the STB-2101H is starting up, then shines steadily green once
the STB-2101H is ready (this may take a little while).
The Ethernet LED on the front of the STB-2101H turns green once
the STB-2101H has finished starting up.
If the Power or Ethernet LEDs do not behave as expected,
first check the STB-2101H’s connections. Make sure that the
power is on and the Internet access device is working. If this
does not help, restart the STB-2101H (switch it off, then on
using the ON/OFF switch on the rear panel). If the problem
persists, contact your vendor.
3. A start-up picture displays on the television. When the STB-2101H
has successfully started up, the Home menu displays. Your STB-
2101H is ready to use!
The TV pictures shown in this Quick Start Guide are examples; what you
see may be different (depending on your IPTV service provider)
EXAMP
LE