Zanussi NHT - Manual (Page 2)

HOOD TYPE DISHWASHERS
STANDARD VERSION
EADA1 2012-07-26 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L YELLOW CUTLERY CONTAINER 864242 864242 864242
STAINLESS STEEL INLET HOSE KIT 864016 864016 864016
RINSE BOOSTER PUMP-SING.TANK PRESSURE DW 864051 864051 864051
RINSE AID LEVEL PROBE KIT FOR UC+HT DW 864005 864005 864005
KIT TO MEASURE TOTAL/PART.WATER HARDNESS 864050 864050 864050
KIT 8 PLASTIC BOXES FOR CUTLERY-YELLOW 780068 780068 780068
KIT 4 PLASTIC BOXES FOR CUTLERY-YELLOW 865574 865574 865574
INTEGRATED HACCP KIT FOR UC, HT AND POTW 864001 864001 864001
HACCP PRINTER KIT FOR UC, HT AND POTW 864002 864002 864002
FILTER FOR TOTAL DEMINERALIZATION 864367 864367 864367
FILTER FOR PARTIAL DEMINERALIZATION 864017 864017 864017
DRAIN PUMP KIT FOR 50HZ DISHWASHERS 864199 864199 864199
DETERGENT PUMP KIT 864218 864218
DETERGENT LEVEL PROBE KIT FOR UC+HT DW 864004 864004 864004
COVER GRID FOR SMALL/LIGHT ITEMS IN RACK 867016 867016 867016
BRASS INLET VALVE KIT FOR UC AND HT 864000 864000 864000
BASKET SEMI-PROFESSIONAL 500X500X190MM 867024 867024 867024
BASKET FOR BULK CUTLERY-BROWN 867009 867009 867009
BASKET FOR 6 TRAYS 530X370MM-RED 866743 866743 866743
BASKET FOR 48 SMALL CUPS/24 CUPS-BLUE 867007 867007 867007
BASKET FOR 18 DINNER PLATES 240MM-YELLOW 867002 867002 867002
BASKET FOR 12 SOUP BOWLS 240MM-GREEN 867000 867000 867000
BASKET F.16 VERTIC.GLASSES (H70MM)-BLUE 867023 867023 867023
8 L EXTERNAL AUTOMATIC WATER SOFTENER 860413 860413 860413
20 L EXTERNAL MANUAL WATER SOFTENER 860430 860430 860430
12 L EXTERNAL MANUAL WATER SOFTENER 860412 860412 860412
NHT
505051
NHTD
505052
NHT60
505053
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
�
Fault auto-diagnosis system.
�
Simple control panel with digital
thermometers, indicating both wash
& rinse temperatures.
� An effective rinse system that
uses only 3 litres of clean hot water
(at a pressure of 2 bar) per rack to
ensure lower running costs (in
energy, water and chemical
consumption).
� Large deep drawn wash tank and
internal wash area with round
corners and no pipes to avoid dirt
built-up.
�
Easily removable washing and
rinsing arms, filters and rack support.
�
All the machines have smooth
surfaces and a wash tank with
rounded corners to facilitate
cleaning.
� The single skin hood is supported
by 3 springs to ensure smooth
movements and to guarantee
operator safety.
�
The fully automatic self-cleaning
cycle avoids the risk of bacteria
proliferation.
�
The self-draining wash pump
facilitates the evacuation of stagnant
water after long periods of inactivity
to ensure a higher level of hygiene.
� Frame, height adjustable feet,
base, washing chamber, tank, tank
filter, washing and rinsing arms,jets
and screws in 304 AISI stainless
steel to ensure long term reliability.
� 304 stainless steel boiler with
higher welding protection improves
the resistance against corrosion with
chlorinated water.
�
PVC water supply hose with metal
connections resistant to high water
pressure.
�
The IPX4 water protection.
�
Pre-arranged for on-site HACCP
implementation and Energy
Management device.
� The incorporated Soft Start
feature system offers additional
protection to delicate items such as
glassware and crockery and
increases wash pump reliability.
�
Three phase electrical connection,
convertible on-site.
�
Hood handle on three sides thus
facilitate use in corner installation.
� Open hood on the back side to
prevent steam blasts to the operator.
�
Suitable to be connected to
specific pre-wash tabling, service
entry and exit tabling and roller
conveyor tabling – included in
Electrolux/ZANUSSI Professional
Handling System range.
�
The machine will start with the
close of the hood and stop when the
hood is opened.
� All machines are pre-arranged to
accept external dispensers.
�
97% recyclable by weight.
�
CFC free packaging.
�
Low noise level.
� Developed and produced in ISO
9001 and ISO 14001 certified
factory.
�
In compliance with CE
requirements.