Yamaha DSP-E800 - Manual (Page 13)

E-11
English
B
ASIC OPERA
TION
AD
V
ANCED OPERA
TION
APPENDIX
INTR
ODUCTION
PREP
ARA
TION
IMPEDANCE
SET BEFORE
REAR
CENTER : 4 Ω M
: 4 Ω M
REAR
CENTER : 8 Ω M
: 8 Ω M
SPEAKERS
CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
CENTER REAR
( SURROUND )
+
–
R L
OUTPUT
R
L
MAIN REAR
( SURROUND )
CENTER
SUB
WOOFER
R L
MAIN
IN
L R
Subwoofer
system
Rear speakers
Main speaker
Right
Left Right
Center speaker
2-ch power amplifier
1 2 3 4
S VIDEO SIGNAL
DVD/LD D–TV CBL/SAT
IN OUT MONITOR
OUT VCR DV
S
S S
S VIDEO IN
S VIDEO
OUT
S VIDEO
OUT
S VIDEO
IN S VIDEO
OUT
S
S
S
S VIDEO
OUT
S
■ S VIDEO terminals
If your video components have “S” (high-resolution) video
terminals, they can be connected to this unit’s S VIDEO
terminals. Be sure to connect the input (IN) and output
(OUT) properly.
Notes
• Use a special S VIDEO cable (commercially available) for the S
VIDEO connection.
• If video signals are input from both the S VIDEO input and
composite input terminals, the signals will be directed to their
respective output terminals.
CONNECTIONS
DVD/LD player
TV Monitor
S Video signal
Signal flow
VCR
TV/Digital TV
Cable TV/
satellite tuner
Main speaker
Left
Connecting the Speakers and the External Amplifier
Basic connection
It is necessary to connect a 2-channel amplifier to this unit
in order to drive main speakers.
Be sure to connect the right channel (R), left channel (L),
“+” (red) and “–” (black) properly. If the connections are
faulty, no sound will be heard from the speakers, and if the
polarity of the speaker connections is incorrect, the sound
will be unnatural and lack bass.
■ Connecting 2-channel amplifier
Connect the input terminals of a 2-ch power amplifier to the
MAIN OUTPUT terminals of this unit. If you connect the
AUX input terminals of the external amplifier to the MAIN
OUTPUT terminals of this unit, be sure to set the volume of
the external amplifier around –16 dB to –18 dB.
■ Connecting a rear speaker system
Connect a rear speaker system to the REAR SPEAKER
(SURROUND) output terminals of this unit.
■ Connecting a center speaker
Connect a center speaker to the CENTER SPEAKER output
terminals of this unit.
■ Connecting a subwoofer system
Connect the input terminal of a subwoofer system to the
SUBWOOFER OUTPUT terminal of this unit.
CAUTIONS
• Use speakers with the specified impedance shown on
the rear panel of this unit.
• Do not let the bare speaker wires touch each other and
do not let them touch any metal part of this unit. This
could damage the unit and/or speakers.
103.E800_07-15(Eng) 5/18/0, 1:36 PM 11