Yamaha DSP-E800 - Manual (Page 6)

E-4
CONTROLS AND FUNCTIONS
Front Panel
1 STANDBY/ON
Press this switch to turn on the power of this unit or to set
this unit in the standby mode. Before turning the power on,
set VOLUME to the “m” position.
Standby mode
In this mode, this unit consumes a very small quantity of
power to receive infrared-signals from the remote
control.
2
Remote control sensor
This receives signals from the remote control.
3
Display
This shows various information. (Refer to page 5 for
details.)
4
INPUT MODE
Press this button to select the input mode among AUTO,
DTS and ANALOG for the DVD/LD, D-TV and CBL/SAT
sources.
5
INPUT SELECTOR
Turn this selector to select the input source (TUNER, CD,
VCR, CBL/SAT, D-TV, DVD/LD) that you want to listen to
or watch. The arrow for the selected input source indicator
lights up on the display.
6 VOLUME
Turn this control to turn up or down the volume.
7 SET MENU +/–
Press these buttons to adjust the setting on the SET MENU.
8
NEXT
Press this button to select the item on the SET MENU. This
button functions like on the remote control when using
the SET MENU.
9
TAPE/MD MON / 6CH INPUT
Press this button to select a tape or an MD source. The
“TAPE/MD MONITOR” indicator lights up on the display.
When you press the button again, the “TAPE/MD
MONITOR” indicator goes off, “6CH INPUT” appears on
the display and you can listen to a source connected to the
6CH INPUT terminals.
0 EFFECT
Press this button to turn on or off the effect speakers (center
and rear). If you turn them off, the signals of the center and
rear channels are directed to the right and left main speakers
when playing a source encoded with Dolby Digital and
DTS. In this case, the output levels of the right and left
speakers may not match.
q PROGRAM selector
Press l or h to select a DSP program when the effect
speakers (center and rear) are turned on. The name of the
selected program appears on the display.
STANDBY/ON
INPUT MODE
INPUT SELECTOR
VOLUME
16
20
28
40
60
00 0
2
4
8
12
–dB
PROGRAM SET MENU EFFECT TAPE/MD MON
/6CH INPUT
NEXT + –
NATURAL SOUND AV PROCESSOR/AMPLIFIER DSP–E800 CINEMA DSP DOLBY
D I G I T A L
D I G I T A L
S U R R O U N D
1 2 3 4 5 6
q 0 9 8 7
102.E800_01-06(Eng) 5/18/0, 1:36 PM 4