Yamaha AW4416 - Manual (Page 52)

Chapter2—Parts and their functions
38
— Operation Guide
Display section
1 Display
This is a 320
×
240 pixel liquid crystal display with backlight, that displays the val-
ues of the mix parameters and the current operating status.
B [PAN] control
This controls the pan of the channel currently selected by the [SEL] key. If the ste-
reo output channel is selected, this controls the L/R channel balance.
C EQ [Q]/EQ [F] (EQ frequency)/EQ [G] (EG gain) controls
These are controls for manually operating the EQ of the channel currently
selected by the [SEL] key. From above, they adjust the Q (steepness), F (center fre-
quency), and G (gain) parameters. Use the 4 EQ [HIGH]–EQ [LOW] keys to
select the band that will be controlled.
D EQ [HIGH]/EQ [HI-MID]/EQ [LO-MID]/EQ [LOW] keys
These keys select the band that will be controlled by the 3 controls.
E [F1]–[F5] (function 1–5) keys
These keys are used to access pages or to execute specific functions, according to
the tabs or buttons shown at the bottom of the display.
PROFESSIONAL AUDIO WORKSTATION
LO LO-MID
HI-MID HI EQ F
PAN
G
Q
SHIFT F1 SHIFT F2 F3 F4 F5
SHIFT F1 SHIFT
LOW
LO-MID
HI-MID
HIGH
F2 F3 F4 F5
EQ
F
PAN
G
Q
6
1
7 5
2
4
3