Yamaha AW4416 - Manual (Page 57)

Chapter2—Parts and their functions
— Operation Guide
43
E [ENTER] key
This key is used to finalize a value, execute a function, or move to the specified
locate point.
Locate section
In this section you can perform locate operations for the recorder.
1 [NUM LOCATE] (number locate) key
This key is used to specify a locate point as a numerical value. When this key is
lit, you can use the numeric keys or the [DATA/JOG] dial to input a locate posi-
tion, and press the [ENTER] key to execute the Locate operation.
B MARK SEARCH [ ]/[ ] keys
These keys are used to move to the nearest pre-specified mark point.
C [MARK] key
When you press this key, the current location will be memorized as a mark point.
D [AUTO PUNCH] key
This key turns the auto punch-in/out function on/off.
E LAST REC[IN]/[OUT] (last record in/out) keys
These keys move to the point at which recording was last begun (the IN point) or
ended (the OUT point).
F [SET] key
This key is used in conjunction with the LAST REC[IN]/[OUT] keys and the [A]/
[B] keys to set the last record in/out points or the A/B points. It is also used in con-
junction with the [RTZ] key to set the zero point of relative time (REL).
LAST REC
MARK SEARCH
LAST REC 5 4 IN OUT
NO
A B REPEAT
RTZ
2 3 1
0
ROLL BACK
CANCEL
SET
MARK NUM LOCATE 8 9 7
6 AUTO
PUNCH
PROFESSIONAL AUDIO WORKSTATION
LAST REC LAST REC
5 4
IN OUT
A B REPEAT
RTZ
2 3 1
0
ROLL
BACK
CANCEL
SET
6
AUTO
PUNCH
MARK SEARCH
MARK
NUM
LOCATE
8 9 7
1 3 2
4
9 7
8
J K L M
5
6