Yamaha UX256 - Manual (Page 21)

21
Installing the Driver
7. Click [OK]. The system displays the “OMS Driver Search” dialog box.
Remove the check from the “Modem” and “Printer” check boxes, and
click
[Search] .
8. After the search operation is complete, make sure that “USB-MIDI 1” is
listed in the “OMS Driver Setup” dialog, then click [OK] .
• If the UX256 is not detected correctly, “USB-MIDI 1” does not appear.
Check the cable connection and repeat the procedure from the begin-
ning.
• If your iMac does not detect the UX256, “iMac Update 1.1” may not have
been installed. See page 8 for more information.
• The system displays one “USB-MIDI x” message for each connected
UX256.
NOTE