Yamaha R-V98 - Manual (Page 10)

10
ADJUSTMENT BEFORE OPERATION
Speaker balance adjustment
This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test
tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker.
This is important for the best performance of the digital sound field processor.
Set to the “
∞
” position.
Select the front speakers to be used.
* If you use two front speaker systems, press both the A
and B switches.
Set to the “0” position.
Turn the DSP on, so that a DSP program name
appears on the display.
Select the PRO LOGIC or PRO LOGIC
ENHANCED mode, so that the corresponding name is
illuminated on the display.
1
5
2
3
4
5
1
4
2 3
SPEAKERS
A B
ON
OFF
ON
OFF
BASS
— 5 + 5
0
TREBLE
— 5 + 5
0
BALANCE
0
L 5 5 R
6
— dB
VOLUME
0
POWER
EFFECT
PRO LOGIC ENHANCED
SUR.
CENTER
MODE PRO LOGIC ENHANCED CNCT VIDEO
+ MONO MOVIE
VOLUME
HALL
— +
DELAY
TIME
EFFECT
ON/OFF
ROCK
SUR.
—
6