Speaker setting-up for this unit, Speakers to be used, Speaker configuration – Yamaha R-V98 User Manual

Page 6: Speaker placement

Advertising
background image

6

SPEAKER SETTING-UP FOR THIS UNIT

SPEAKERS TO BE USED

This unit is designed to provide the best sound-field quality with a 5 speaker configuration. The speakers to be used with this unit
will be mainly front speakers, rear speakers, and a center speaker. (You can omit the center speaker. Refer to the “4-Speaker
Configuration
” shown below.)
The front speakers are used for the output of the main source sound and the effect sound. They will probably be the speakers of
your present stereo speaker system. The rear speakers are used for the output of the effect sound. And the center speaker is
used for the output of the center sound (dialog etc.) encoded with the Dolby Surround. The rear and center speakers do not need
to be equal in power to the front speakers. However, all the speakers should have high enough power handling to accept the
maximum output of this unit.

SPEAKER CONFIGURATION

5-Speaker Configuration

This configuration is the most effective and is the one that is
recommended. In this configuration, the center speaker is
necessary as well as the rear speakers. If the digital sound
field program is in DOLBY PRO LOGIC or DOLBY PRO
LOGIC ENHANCED
mode conversations will be output from
the center speaker and the ambience will be excellent.

Set the center mode to the “NORMAL” or “WIDE” position.
(For details, refer to page 11.)

4-Speaker Configuration

The center speaker is not used in this configuration. If the
digital sound field program is in the DOLBY PRO LOGIC or
DOLBY PRO LOGIC ENHANCED mode, the center sound is
output from the left and the right front speakers. However, the
sound effect of other programs can be the same as that of the
5-speaker configuration.

Be sure to set the center mode to the “PHANTOM” position.
(For details, refer to page 11.)

SPEAKER PLACEMENT

The recommanded speaker configuration, the 5-speaker configuration, will require two speaker pairs: front speakers (your normal
stereo speakers), and rear speakers, plus a center speaker. When you place these speakers, refer to the following.

Front: In normal position. (The position of your present

stereo speaker system.)

Rear: Behind your listening position, facing slightly inward.

Nearly six feet (approx. 1.8 m) up from the floor.

Center: Precisely between the front speakers. (To avoid

interference with TV sets, use a magnetically shielded
speaker. If, however, it is not effective, keep the
speaker away from TV sets.)

Front L Center Front R

Dialogue

Surround sound

Dialogue

Surround sound

Rear L Rear R

Front L Front R

Dialogue

Surround sound

Dialogue

Surround sound

Rear L Rear R

Front R

Center

Front L

TV set

Rear R

Rear L

Advertising