Xerox WorkCentrePro - Manual (Page 33)

System Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide 33
Button names and icons used on the control panel may differ depending on the country
of purchase.
System Settings
During manufacture this machine is pre-programmed with default settings which can
be customized using the System Settings. The System Settings can be accessed via
the <Log In/Out> button. The following set up categories are available.
• Common Settings
• Copy Settings
• Network Mode Settings
• Print Mode Settings
• Scan Mode Settings
• Fax Mode Settings
• E-mail/iFax Settings
• Mailbox Settings
• Application Communication Settings
NOTE: CentreWare Internet Services is software that enables you to display,
configure and change the settings of the machine by using a browser on a computer
instead of the machine's control panel. For more information, refer to the CentreWare
Internet Service chapter of the User Guide.
Changing the Settings
User ID and password are required to change the settings. The default user ID and
password for the System Administrator are "11111" and "x-admin" respectively. It
allows you to access the System Settings described in this chapter.
NOTE: You are advised to change the password from the default one. For further
assistance, contact your Xerox Welcome Center.
Follow these steps to change the default settings:
12 <*(asterisk)> Indicates the special character used in a fax number and
designates a group code. Also allows you to specify an F Code or a
password.
13 <All Services> Displays the [All Services] screen for selection of all the available
services on the machine.
Button Function