Yamaha K-902 - Manual (Page 6)

6
PLAYBACK (Common to DECKs A and B)
NATURAL SOUND STEREO DOUBLE CASSETTE DECK K-902
DOLBY NR
OFF/ B/ C
REC LEVEL
0 10
1 9
2 8
3 7
5 4 6
PHONES
DIRECTION
POWER MODE
O / p / ∏ / RELAY
! PLAY ⁄
STOP MUTE/SEARCH
EJECT
NORMAL HIGH
DUBBING A # B
! PLAY ⁄
STOP MUTE/SEARCH REC/PAUSE
EJECT
RESET RESET DIRECTION
PLAYBACK DECK A RECORD/PLAYBACK DECK B
POWER
➠
ON
2 3
PHONES
STOP
1
RESET
! 4 5 ⁄
Preparation for playback
÷ Turn on the POWER switch.
÷ Set your amplifier or receiver to cassette deck function mode.
Basic operation - To play back a cassette tape
EJECT
MODE
“ / [ / ” / RELAY
1
3 5 4
Refer to the following
description.
DIRECTION
Select the tape running direction for DECK A
or B. Each time this button is pressed, the
tape running direction changes between
forward (
# ) and reverse ( @ ), and the
corresponding indicator lights on the display.
To stop playback
Press the STOP button. To remove the cassette tape, press
the EJECT button. The cassette compartment door opens.
To turn off the power, press the POWER button.
To set the counter reading to “0000”
Press the RESET button. Use the tape counter to aid in
locating a point on a tape (0000 to 9999).
To fast forward or rewind the tape
When the tape running indicator
# is lit:
Pressing the ⁄ button fast forwards the tape while
pressing the ! button rewinds the tape.
When the tape running indicator @ is lit:
Pressing the ! button fast forwards the tape while
pressing the ⁄ button rewinds the tape.
PLAY
2
DOLBY NR
OFF/ B/ C
Refer to the following
description.
Insert the cassette with the exposed tape side
facing down. (The side facing you is called the
forward side and the opposite side is called the
reverse side.) To close the compartment, push
in the compartment door until it locks shut.